Publications

2019 2018 2017 2016 2015 2014 2013 2012 2011

1. Gulsoy, Z., Sezginel, K.B., Uzun, A., Keskin, S., Yildirim, R. 2019. “Analysis of CH4 uptake over MOFs using data mining tools”, ACS Combinatorial Science.
DOI: 10.1021/acscombsci.8b00150

2. Farzalipour Tabriz, M., Cizmeciyan, N., Birer, O., Yurtsever, E. 2019. “Energy landscapes in photochemical dissociation of small peroxides”, The Journal of Physical Chemistry A, 123(7), 1353-1362.
DOI: 10.1021/acs.jpca.8b08666

3. Babucci, M., Fang, C-Y., Perez-Aguilar, J.E., Hoffman, A.S., Boubnov, A., Guan, E., Bare. S.R., Gates, B.C., Uzun, A. 2019. “Controlling catalytic activity and selectivity for partial hydrogenation by tuning the environment around active sites in iridium complexes bonded to supports”, Chemical Science, 10, 2623-2632.
DOI: 10.1039/C8SC05287E

4. Nazeer, M. A., Yilgor, E., Yilgor, I. 2019. “Electrospun polycaprolactone/silk fibroin nanofibrous bioactive scaffolds for tissue engineering applications”, Polymer, 168, 86-94.
DOI: 10.1016/j.polymer.2019.02.023

5. Kara, L., Ozkan, D., Yagci, M.B., Sulukan, E., Sert, Y., Sert, T.S. 2019. “Friction and wear behaviors of TiN coatings under dry and vacuum conditions”, Tribology Transactions.
DOI: 10.1080/10402004.2018.1559385

6. Oztuna, F.E.S., Unal, O., Erdem, E., Acar, H.Y., Unal, U. 2019. “Layer-by-layer grown electrodes composed of cationic Fe3O4 nanoparticles and graphene oxide nanosheets for electrochemical energy storage devices”, Journal of Physical Chemistry C, 123(6), 3393-3401.
DOI: 10.1021/acs.jpcc.8b11772

7. Beyazay, T., Oztuna, F.E.S., Unal, U. 2019. “Self-standing reduced graphene oxide papers electrodeposited with manganese oxide nanostructures as electrodes for electrochemical capacitors”, Electrochimica Acta, 296, 916-924.
DOI: 10.1016/j.electacta.2018.11.033

8. Onder, O.C., Yilgor, E., Yilgor, I. 2019. “Critical parameters controlling the properties of monolithic poly(lactic acid) foams prepared by thermally induced phase separation”, Journal of Polymer Science part B- Polymer Physics, 57(2), 98-108.
DOI: 10.1002/polb.24762

9. Motallebzadeh, A., Dilawary, S.A.A., Atar, E., Cimenoglu, H. 2019. “High-temperature oxidation of Stellite 12 hardfacings: Effect of Mo on characteristics of oxide scale”, Journal of Materials Engineering and Performance, 28(1), 463-474.
DOI: 10.1007/s11665-018-3796-6

10. Khodabakhsh, M., Unal, U. 2019. “Er doped layered perovskites with dual mode luminescent behavior and tunable multicolor upconversion emission”, Methods and Applications in Fluorescence, 7(2), 024002.
DOI: 10.1088/2050-6120/aaf75f

11. Bozkurt, O.D., Baglar, N., Celebi, S., Uzun, A. 2019. “Assessment of acid strength in sodium-exchanged resin catalysts: Consequences on glycerol etherification with isobutene in batch and flow reactors”, Molecular Catalysis, 466, 1-12.
DOI: 10.1016/j.mcat.2018.12.027

12. Simsek, G., Demirsar Arli, B., Kaya, S., Colomban, P. 2019. “On-site pXRF analysis of body, glaze and colouring agents of the tiles at the excavation site of Iznik kilns”, Journal of the European Ceramic Society, 39(6), 2199-2209.
DOI: 10.1016/j.jeurceramsoc.2019.01.050

13. Singh, D., Tabari, T., Ebadi, M., Trochowski, M., Yagci, M.B., Macyk, W. 2019. “Efficient synthesis of BiFeO3 by the microwave-assisted sol-gel method: “A”
site influence on the photoelectrochemical activity of perovskites”, Applied Surface Science, 471, 1017-1027.
DOI: 10.1016/j.apsusc.2018.12.082

14. Sarac Oztuna, F. E., Yagci, M. B., Unal, U. 2019. “First-row Transition Metal Cations (Co2+, Ni2+, Mn2+, Fe2+) and Graphene (Oxide) Composites: From Structural Properties to Electrochemical Applications”, Chemistry-A European Journal.
DOI: 10.1002/chem.201806309

15. Tuten, N., Canadinç, D., Motallebzadeh, A., Bal, B. 2019. “Microstructure and tribological properties of TiTaHfNbZr high entropy alloy coatings deposited on Ti-6Al-4V substrates”, Intermetallics, Vol 105, pp 99-106.
DOI: 10.1016/j.intermet.2018.11.015

16. Sabahi Namini, A., Motallebzadeh, A., Nayebi, B., Shahedi Asl, M., Azadbeh, M. 2019. “Microstructure–mechanical properties correlation in spark plasma sinteredTi–4.8 wt.% TiB2 composites”, Materials Chemistry and Physics, Vol 223, pp 789-796.
DOI: 10.1016/j.matchemphys.2018.11.057

17. Sıkan, F., Atabay, S.E., Motallebzadeh, A., Özerinç, S., Kalay, I., Kalay, Y. E. 2019. “Effect of Sm on thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses”, Materials Science and Engineering A, Vol 743, pp 168-174.
DOI: 10.1016/j.msea.2018.11.068

18. Simsek, G., Unsalan, O., Bayraktar, K. and Colomban Ph. 2019. “On-site pXRF analysis of glaze composition and colouring agents of “Iznik” tiles at Edirne mosques (15th and 16th-centuries)”, Ceramics International, 45 (1), 595-605.
DOI: 10.1016/j.ceramint.2018.09.213

19. Aydemir, D., Hashemkhani, M., Durmusoglu, E.G., Acar Yagci, H., Ulusu, N.N. 2019. “A new substrate for glutathione reductase: Glutathione coated Ag2S quantum dots”, Talanta, 194, 501-506.
DOI: 10.1016/j.talanta.2018.10.049

1. Nozari, V., Zeeshan, M., Keskin, S., Uzun, A. 2018. “Effect of Methylation in Ionic Liquids on the Gas Separation Performance of Ionic Liquid/Metal-Organic Framework Composites” CrystEngComm, 20, 7137-7143.
DOI: 10.1039/C8CE01364K

2. Şimşek, G. 2018. “p-XRF’in Kültürel Miras Eserleri Üzerine Yapılan Çalışmalarda Kullanımı”, SDÜ ART-E, 11(22), 372-380.
DOI: 10.21602/sduarte.463602

3. Özkan, D., Erarslan, Y., Sulukan, E., Kara, L., Yılmaz, M.A., Yağcı, M.B. 2018. “Tribological behavior of TiAlN, AlTiN, and AlCrN coatings at boundary lubricating condition”, Tribology Letters, 66:152.
DOI: 10.1007/s11249-018-1111-1

4. Dilawary, Sh. A. A., Motallebzadeh, A., Afzal, M., Atar, E., Cimenoglu, H. 2018. “Nanotribological characteristics of laser surface melted Stellite 12+Mo hardfacing”, Industrial Lubrication and Tribology.
DOI: 10.1108/ILT-05-2018-0175

5. Abboud, M., Motallebzadeh, A., Verma, N., Özerinç, S. 2018. “Nanoscratch Behavior of Metallic Glass/Crystalline Nanolayered Composites”, JOM: the journal of the Minerals, Metals & Materials Society.
DOI: 10.1007/s11837-018-3270-9

6. Onder, O.C., Nazeer, M.A., Yilgor, E., Yilgor, I. 2018. “Spontaneous formation of microporous poly(lactic acid) coatings”, Progress in Organic Coatings, 125, 249-256.
DOI: 10.1016/j.porgcoat.2018.09.016

7. Kuvvetli, F., Arslaner, H., Kural Özgörüş, N., Gülgün, M.A., Sezen, M., Bakan, F., Şimşek, G., Ünlü, C., Lee, L. 2018. Görünenin Ötesinde Osman Hamdi Bey, Osman Hamdi Bey Beyond Vision, Kitap Yayınevi Ltd. ISBN: 978-605-2095-42-3.

8. Kurtoglu, S.F., Soyer-Uzun, S., Uzun, A. 2018. “Modifying the Structure of Red Mud by Simple Treatments for High and Stable Performance in COx-Free Hydrogen Production from Ammonia”, International Journal of Hydrogen Energy.
DOI: 10.1016/j.ijhydene.2018.09.032

9. Zeeshan, M., Keskin, S., Uzun, A. 2018. “Enhancing CO2/CH4 and CO2/N2 separation performances of ZIF-8 by post-synthesis modification with [BMIM][SCN]” Polyhedron 155, 485.
DOI: 10.1016/j.poly.2018.08.073

10. Kocaman, E., Akarcay, O., Baglar, N., Celebi, S., Uzun, A. 2018. “Isobutene oligomerization on MCM-41-supported tungstophosphoric acid“, Molecular Catalysis, 457, 41-50.
DOI: 10.1016/j.mcat.2018.07.013

11. Mohammadzadeh, A., Sabahi Namini, A., Azadbeh, M. and Motallebzadeh, A. 2018. “On the physical and mechanical properties of spark plasma sintered pure Ti and Ti-TiB composite”, Material Research Express, 5, 126512.
DOI: 10.1088/2053-1591/aae057

12. Sheikh, S., Bijaksana, M. K., Motallebzadeh, A., Shafeie, S., Lozinko, A., Gan, L., Tsao, T-K., Klement, U., Canadinc, D., Murakami, H., Guo, Sh, 2018. “Accelerated oxidation in ductile refractory high-entropy alloys”, Intermetallics, 97, 58-66.
DOI: 10.1016/j.intermet.2018.04.001

13. Shahedi Asl, M., Sabahi Namini, A., Motallebzadeh, A., Azadbeh, M. 2018. “Effects of Sintering Temperature on Microstructure and Mechanical Properties of Spark Plasma Sintered Titanium”, Materials Chemistry and Physics, 203, 266-273.
DOI: 10.1016/j.matchemphys.2017.09.069

14. Bingöl, H. B., Demir Duman, F., Yagci Acar, H. F., Yagci, M. B. and Avci, D. 2018. “Redox-responsive phosphonate-functionalized poly(β-amino ester) gels and cryogels”, European Polymer Journal, 108, 57-68.
DOI: 10.1016/j.eurpolymj.2018.08.029

15. Balcı, O., Burkhardt, U., Schmidt, M., Hennicke, J., Yagci, M. B. and Somer, M. 2018. “Densification, microstructure and properties of TiB2 ceramics fabricated by spark plasma sintering”, Materials Characterization, 145, 435-443.
DOI: 10.1016/j.matchar.2018.09.010

16. Rashid, Z., Atay, I., Soydan, S., Yagci, M. B., Jonás, A., Yilgor, E., Kiraz, A. and Yilgor, I. 2018. “Reversible switching of wetting properties and erasable patterning of polymer surfaces using plasma oxidation and thermal treatment”, Applied Surface Science, 441, 841-852.
DOI: 10.1016/j.apsusc.2018.02.089

17. Zeeshan, M., Nozari, V., Yagci, M. B., Isik, T., Unal, U., Ortalan, V., Keskin, S. and Uzun, A. 2018. “Core−Shell Type Ionic Liquid/Metal Organic Framework Composite: An Exceptionally High CO2/CH4 Selectivity”, Journal of American Chemical Society, 140, 10113-10116.
DOI: 10.1021/jacs.8b05802

18. Cihan, C., Kocabas, C., Demirbas, U. and Sennaroglu, A. 2018. “Graphene mode-locked femtosecond Alexandrite laser”, Optics Letters, 43(16), 3969-3972.
DOI: 10.1364/OL.43.003969

19. Cankaya, H., Gorgulu, A. T., Kurt, A., Speghini, A., Bettinelli, M. and Sennaroglu, A. 2018. “Comparative Spectroscopic Investigation of Tm3+:Tellurite Glasses for 2-μm Lasing Applications”, Applied Sciences, 8(3), 333.
DOI: 10.3390/app8030333

20. Biçer, M., Esfahani, M. N., Yalcinkaya, A. D. and Alaca, B. E. 2018. “A deformation based approach to tuning of magnetic micromechanical resonators”, Journal of Micromechanics and Microengineering, 28, 105003.
DOI: 10.1088/1361-6439/aac8f2

21. Dogru, S., Aksoy, B., Bayraktar, H. and Alaca, B. E. 2018. “Poisson’s ratio of PDMS thin films”, Polymer Testing, 69, 375-384.
DOI: 10.1016/j.polymertesting.2018.05.044

22. Esfahani, M. N., Kilinc, Y., Karakan, M. C., Orhan, E., Hanay, S., Leblebici, Y. and Alaca, B. E. 2018. “Piezoresistive silicon nanowire resonators as embedded building blocks in thick SOI”, Journal of Micromechanics and Microengineering, 28, 045006.
DOI: 10.1088/1361-6439/aaab2f

23. Dilawary, S.A.A., Motallebzadeh, A., Akhter, R., Atar, E. and Cimenoglu, H. 2018. “Enhanced wear resistance of Stellite 12 by Mo addition and LSM”, Surface Engineering, 34(8), 569-576.
DOI: 10.1080/02670844.2017.1393164

24. Kurtoglu, S.F., Sarp, S., Yılmaz Akkaya, C., Yağcı, B., Motallebzadeh, A., Soyer-Uzun, S. and Uzun, A. 2018. “COx – free hydrogen production from ammonia decomposition over sepiolite-supported nickel catalysts”, International Journal of Hydrogen Energy, 43(21), 9954-9968.
DOI: 10.1016/j.ijhydene.2018.04.057

25. Muti, A., Kocabas, A. and Sennaroglu, A. 2018. ” 5-nJ Femtosecond Ti3+:sapphire laser pumped with a single 1 W green diode”, Laser Physics Letters, 15(5), 055302.
DOI: 10.1088/1612-202X/aaaea7

26. Unal, O., Khodadust, R., Durmusoglu, E.G., Erdem, E., Yagci, M.B., Ow-Yang, C., Yurtsever, E. and Yagci Acar, H. 2018. “Discovery of an exceptionally strong luminescence of polyethyleneimine-superparamagnetic iron oxide nanoparticles”, Macromolecular Chemistry and Physics, 219(9), 1700563.
DOI: 10.1002/macp.201700563

27. Cavuslar, O., Celaloglu, C., Duman, F.D., Konca, Y.U., Yagci, M.B. and Yagci Acar, H. 2018. “PH and molecular weight dependence of auric acid reduction by polyethylenimine and the gene transfection efficiency of cationic gold nanoparticles thereof”,New Journal of Chemistry, 42(12), 10078-10083.
DOI: 10.1039/c8nj00628h

28. Jalal, A. and Uzun, A. 2018. “An ordinary nickel catalyst becomes completely selective for partial hydrogenation of 1,3-butadiene when coated with tributyl (methyl) phosphonium methyl sulfate”,Applied Catalysis A: General, 562, 321-326.
DOI: 10.1016/j.apcata.2018.06.016

29. Arslan, M., Motallebzadeh, A., Kiskan, B., Demirel, A.L., Kumbaraci, I.V. and Yagci, B. 2018. “Combining benzoxazine and ketene chemistries for self-healing of high performance thermoset surfaces”, Polymer Chemistry, 9(15), 2031-2039.
DOI: 10.1039/c8py00293b

30. Bal, B., Koyama, M., Canadinc, D., Gerstein, G., Maier, H.J. and Tsuzaki, K. 2018. “On the utility of crystal plasticity modeling to uncover the individual roles of microdeformation mechanisms on the work hardening response of fe-23Mn-0.5C TWIP Steel in the presence of hydrogen”, Journal of Engineering Materials and Technology, Transactions of the ASME, 140(3, 031002.
DOI: 10.1115/1.4038801

31. Dilawary, S.A.A., Motallebzadeh, A., Houdkova, S., Medlin, R., Haviar, S., Lukac, F., Afzal, M. and Cimenoglu, H. 2018. “Modification of M2 hardfacing: Effect of molybdenum alloying and laser surface melting on microstructure and wear performance”, Wear, 404-405, 111-121.
DOI: 10.1016/j.wear.2018.03.013

32. Motallebzadeh, A., Yagci, M.B., Bedir, E., Aksoy, C.B. and Canadinc, D. 2018. “Mechanical properties of TiTaHfNbZr high-entropy alloy coatings deposited on NiTi shape memory alloy substrates”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49(6), 1992-1997.
DOI: 10.1007/s11661-018-4605-4

33. Kaya, K., Kurtoglu, S.F., Uzun, A. and Soyer-Uzun, S. 2018. “Consequences of simple acid-pretreatments on geopolymerization and thermal stability of red mud-based geopolymers”, Industrial and Engineering Chemistry Research, 57(21), 7156-7168.
DOI: 10.1021/acs.iecr.8b00920

34. Dilawary, S.A.A., Motallebzadeh, A., Atar, E. and Cimenoglu, H. 2018. “Influence of Mo on the high temperature wear performance of NiCrBSi hardfacings”, Tribology International, 127, 288-295.
DOI: 10.1016/j.triboint.2018.06.022

35. Baloch, S.K., Jonas, A., Kiraz, A., Alaca, B.E. and Erkey, C. 2018. “Sensitivity of compositional measurement of high-pressure fluid mixtures using microcantilever frequency response”, Sensors and Actuators, A: Physical, 278, 111-126.
DOI: 10.1016/j.sna.2018.05.025

36. Aydemir, D., Karabulut, G., Şimşek, G., Gok, M., Barlas, N. and Ulusu, N.N. 2018. “Impact of the Di(2-Ethylhexyl) Phthalate administration on trace element and mineral levels in relation of kidney and liver damage in rats”, Biological Trace Element Research, 1-15.
DOI: 10.1007/s12011-018-1331-0

37. Tabari, T., Ebadi, M., Singh, D., Caglar, B. and Yagci, M. B. 2018. “Efficient synthesis of perovskite-type oxide photocathode by nonhydrolytic sol-gel method with an enhanced photoelectrochemical activity”, Journal of Alloys and Compounds, in press.
DOI: 10.1016/j.jallcom.2018.03.396

38. Baylam, I., Ozharar, S. and Sennaroglu, A. 2018. “1200 nm pumped Tm3+:Lu2O3 ceramic lasers”, Applied Optics, 57(8), 1772.
DOI: 10.1364/AO.57.001772

39. Buz, E., Morlet-Savary, F., Lalevée, J. and Yagci Acar, H. 2018. “CdS-Oleic acid quantum dots as long-wavelength photoinitiators in organic solvent and preparation of luminescent, colloidal CdS/Polymer nanocomposites”Macromolecular Chemistry and Physics, 219, 17000356.
DOI: 10.1002/macp.201700356

40. Bharadwaj, S., Pandey, A., Yagci, B., Ozguz, V. and Qureshi, A. 2018. “Graphene nano-mesh-Ag-ZnO hybrid paper for sensitive SERS sensing and self-cleaning of organic pollutants”, Chemical Engineering Journal , 336, 445.
DOI: 10.1016/j.cej.2017.12.040

41. Baylam, I., Canbaz, F. and Sennaroglu, A. 2018. “Dual-wavelength temporal Dynamics of a gain-switched 2-m Tm3+:Lu2O3 ceramic laser”, IEEE Journal of Selected Topics in Quantum Electronics, 24(5), 1601208.
DOI: 10.1109/JSTQE.2018.2805825

42. Yorulmaz, I. and Sennaroglu, A. 2018. “Low-threshold diode-pumped 2.3-m Tm3+:YLF lasers”, IEEE Journal of Selected Topics in Quantum Electronics, 24(5), 1601007.
DOI: 10.1109/JSTQE.2018.2791409

43. Toker, S.M., Gerstein, G., Maier, H.J. and Canadinc, D. 2018. “Effects of microstructural mechanisms on the localized oxidation behavior of NiTi shape memory alloys in simulated body fluid”, J Mater Sci, Biomaterials, 53, 948.
DOI: 10.1007/s10853-017-1586-4

44. Yar, Y., Khodadust, R., Akkoc, Y., Utkur, M., Saritas, E.U., Gozuacik, D. and Yagci Acar, H. 2018. “Development of tailored SPION-PNIPAM nanoparticles by ATRP for dually responsive doxorubicin delivery and MR imaging”, Journal of Materials Chemistry B, 6, 289.
DOI: 10.1039/c7tb00646b

45. Baloch, S.K., Jonas, A., Kiraz, A., Alaca, B.E. and Erkey, C. 2018. “Determination of composition of ethanol-CO2 mixtures at high pressures using frequency response of microcantilevers”, The Journal of Supercritical Fluids, 132, 65.
DOI: 10.1016/j.supflu.2017.03.027

46. Canadinc, D., Uzer, B., Elmadagli, M. and Guner, F. 2018. “Nanotwin formation in high-manganese austenitic steels under explosive shock loading”, Metallurgical and Materials Transactions A, 49A, 1026.
DOI: 10.1007/s11661-018-4510-x

47. Cihan, C., Muti, A., Baylam, I., Kocabas, A., Demirbas, U. and Sennaroglu, A. 2018. “70 femtosecond Kerr-lens mode-locked multipass-cavity Alexandrite laser”, Optics Letters, 43(6), 1315.
DOI: 10.1364/OL.43.001315

48. Dilawary, S.A.A., Motallebzadeh, A., Afzal, M., Atar, E. and Cimenoglu, H. 2018. “Laser surface melting of 10 wt% Mo alloyed hardfacing Stellite 12 plasma transferred arc deposits: Structural evolution and high temperature wear performance”, Optics and Laser Technology, 101, 404.
DOI: 10.1016/j.optlastec.2017.11.038

49. Onder, O.C., Yilgor, E. and Yilgor, I. 2018. “Preparation of monolithic polycaprolactone foams with controlled morphology”, Polymer, 136, 166.
DOI: 10.1016/j.polymer.2017.12.054

50. Yildirim, E., Yurtsever, M., Yilgör, E., Yilgör, İ. and Wilkes G.L. 2018. “Temperature-dependent changes in the hydrogen bonded hard segment network and microphase morphology in a model polyurethane experimental and simulation studies”, Journal of Polymer Science, Polymer Physics, 56, 182.
DOI: 10.1002/polb.24532

51. Ulku, I., Morlet-Savary, F., Lalevée, J. and Yagci Acar, F. 2018. “Homogenous photopolymerization of acrylic monomers initiated with ZnO-methacrylate in non-aqueous medium and production of luminescent nanocomposites”, Polymer Chemistry, 9, 828.
DOI: 10.1039/c7py02030a

52. Gurses, M.S., Erkey, C., Kizilel, S. and Uzun, A. 2018. “Characterization of sodium tripolyphosphate and sodium citrate dehydrate residues on surfaces”, Talanta, 176, 8.
DOI: 10.1016/j.talanta.2017.07.092

53. Yilgor, E., Soz, C.K., Yilgor, I. 2018. “Wetting behavior of superhydrophobic poly(methyl methacrylate)”, Progress in Organic Coatings, 125, 530-536.
DOI: 10.1016/j.porgcoat.2018.07.018

1. Aksoy, B., Rehman, A., Bayraktar, H. and Alaca, B.E. 2017. “High-resolution spatiotemporal strain mapping reveals non-uniform deformation in micropatterned elastomers”, Journal of Micromechanics and Microengineering , 27, 045008.
DOI: 10.1088/1361-6439

2. Esfahani, M. N., Yilmaz, M., Wollschlager, N., Rangelow, I.W., Leblebici, Y. and Alaca, B.E. 2017. “Monolithic technology for silicon nanowires in high-topography architectures”, Microelectronic Engineering , 183-184, 42-47.
DOI: 10.1016/j.mee.2017.10.001

3. Demir Duman, F., Erkisa, M., Khodadust, R., Ari, F., Ulukaya, E. and Yagci Acar, H. 2017. “Folic acid-conjugated cationic Ag2S quantum dots for optical imaging and selective doxorubicin delivery to HeLa cells”, Nanomedicine, 12(19).
DOI: 10.2217/nnm-2017-0180

4. Nazeer, M. A., Yilgor, E., Yagci, M. B., Unal, U. and Yilgor, I. 2017. “Effect of reaction solvent on hydroxyapatite synthesis in sol-gel process”, Royal Society Open Science, 4(12), 171098.
DOI: 10.1098/rsos.171098

5. Bursalı, A., Özbal, H., Özbal, R., Şimşek, G., Yağcı, B., Yılmaz Akkaya, C. and Baysal, E. 2017. “Chapter 24: Investigating the source of blue colour in Neolithic beads from Barcın Höyük, NW Turkey”, The Exploitation of Raw Materials in Prehistory, Sourcing, Processing and Distribution, edited by Pereira, T., Terradas, X. and Bicho, N., Cambridge Scholars Publishing.
ISBN: 978-1-4438-9597-2

6. Yilmaz, C. and Unal, U. 2017. “Hydrothermal-electrochemical growth of heterogeneous ZnO:Co films”, Applied Nanoscience, 7(7), 343.
DOI: 10.1007/s13204-017-0579-6

7. Asl, M. S., Namini, A. S., Motallebzadeh, A. and Azadbeh, M. 2017. “Effects of sintering temperature on microstructure and mechanical properties of spark plasma sintered titanium”, Materials Chemistry and Physics, in press.
DOI: 10.1016/j.matchemphys.2017.09.069

8. Uzer, B., Birer, O. and Canadinc, D. 2017. “Investigation of the dissolution-reformation cycle of the passive oxide layer on NiTi orthodontic archwires”, Shape Memory and Superelasticity, 3(3), 264-273.
DOI: 10.1007/s40830-017-0114-3

9. Esfahani, M. N., Yilmaz, M., Sonne, M. R. Hattel, J. H. and Alaca, B. E. 2017. “Selecting the optimum engineering model for the frequency response of fcc nanowire resonators”, Applied Mathematical Modelling, 44, 236-245.
DOI: 10.1016/j.apm.2016.10.022

10. Dilawary, S. A. A., Motallebzadeh, A., Paksoy, A. H., Afzal, M., Atar, E. And Cimenoglu, H. 2017. “Influence of laser surface melting on the characteristics of Stellite 12 plasma transferred arc hardfacing deposit”, Surface&Coatings Technology, 317, 110-116.
DOI: 10.1016/j.surfcoat.2017.03.051

11. Sarac Oztuna, F. E., Barim, S. B., Bozbag, S. E., Yu, H., Aindow, M., Unal, U. And Erkey, C. 2017. “Graphene aerogel supported Pt electrocatalysts for oxygen reduction reaction by supercritical deposition”, Electrochimica Acta, 250, 174-184.
DOI: 10.1016/j.electacta.2017.08.067

12. Oguz, O., Simsek, E., Kosak Soz, C., Kasli Heinz, O., Yilgor, E., Yilgor, I. and Menceloglu, Y. Z. 2017. “Effect of filler content on the structure-property behavior of poly(ethylene oxide) based polyurethaneurea-silica”, Polymer Engineering and Science, early view.
DOI: 10.1002/pen.24672

13. Yilmaz, M., Kilinc, Y., Nadar, G., Tasdemir, Z., Wollschläger, Österle, W., Leblebici, Y. and Alaca, B. E. 2017. “Top-down technique for scaling to nano in silicon MEMS”, Journal of Vacuum Science&Technology , B35(2), 022001.
DOI: 10.1116/1.4978047

14. Esfahani, M. N., Leblebici, Y. and Alaca, B. E. 2017. “A monolithic approach to downscaling silicon piezoresistive sensors”, Journal of Microelectromechanical Systems , 26(3), 624.
DOI: 10.1109/JMEMS.2017.2679219

15. Yılmaz, M., Wollschläger, N., Esfahani, M. N., Österle, W., Leblebici, Y. and Alaca, B. E. 2017. “Superplastic behavior of silica nanowires obtained by direct patterning of silsesquioxane-based precursors”, Nanotechnology, 28, 115302-115312.
DOI: 10.1088/1361-6528/aa5b80

16. Canbaz, F., Yorulmaz, I. and Sennaroglu, A. 2017. “Kerr-lens mode-locked 2.3-m Tm3+:YLF laser as a source of femtosecond pulses in the mid-infrared”, Optics Letters, 42(19), 3964.
DOI: 10.1364/OL.42.003964

17. Ozharar, S. and Sennaroglu, A. 2017. “Mirrors with designed spherical aberration for multi-pass cavities”, Optics Letters, 42(10), 1935.
DOI: 10.1364/OL.42.001935

18. Canbaz, F., Yorulmaz, I. and Sennaroglu, A. 2017. “2.3m Tm3+:YLF laser passively Q-switched with a Cr2+:ZnSe saturable absorber”, Optics Letters, 42(9), 1656.
DOI: 10.1364/OL.42.001656

19. Baylam, I., Ozharar, S., Kakenov, N., Kocabas, C. And Sennaroglu, A. 2017. “Femtosecond pulse generation from a Ti3+: sapphire laser near 800 nm with voltage reconfigurable graphene saturable absorbers”, Optics Letters, 42(7), 1404.
DOI: 10.1364/OL.42.001404

20. Canbaz, F., Kakenov, N., Kocabas, C., Demirbas, U. and Sennaroglu, A. 2017. “Generation of sub-20-fs pulses from a graphene mode-locked laser”, Optics Express, 25(3), 2834.
DOI: 10.1364/OE.25.002834

21. Eriş, G., Baloch, S. K., Aşıkoğlu Bozkurt, A., Jonas, A., Kiraz, A., Alaca, B. E. and Erkey, C. 2017. “Characterization of fluid mixtures at high pressures using frequency response of microcantilevers”, Sensors and Actuators A: Physical, 261, 202-209.
DOI: 10.1016/j.sna.2017.04.044

22. Eryürek, M., Tasdemir, Z., Karadag, Y.,Anand, S., Kilinc, N., Alaca, B. E. and Kiraz, A. 2017. “Integrated humidity sensor based on SU-8 polymer microdisk microresonator”, Sensors and Actuators B: Chemical, 242, 1115-1120.
DOI: 10.1016/j.snb.2016.09.136

23. Nozari, V., Keskin, S. and Uzun, A. 2017. “Toward rational design of ionic liquid/metal-organic framework composites: Effects of interionic interaction energy”, ACS Omega, 2(10), 6613.
DOI: 10.1021/acsomega.7b01074

24. Koyuturk, B., Altintas, C., Kinik, F. P., Keskin, S. and Uzun, A. 2017. “Improving gas separation performance of ZIF-8 by [BMIM] [BF4] incorporation: Interactions and their consequences on performance”, Journal of Physical Chemistry C, 121(19), 10370.
DOI: 10.1021/acs.jpcc.7b00848

25. Jalal, A. and Uzun, A. 2017. “An exceptional selectivitiy for partial hydrogenation on a supported nickel catalyst coated with [BMIM] [BF4] “, Journal of Catalysis, 350, 86.
DOI: 10.1016/j.jcat.2017.04.002

26. Dogru, I. B., Kosak Soz, C., Press, D.A., Melikov, R., Begar, E., Conkar, D., Firat Karalar, E.N., Yilgor, E., Yilgor, I. and Nizamoglu, S. 2017. “3D coffee stains&quotMaterials Chemistry Frontiers, 1, 2360.
DOI: 10.1039/C7QM00281E

1. Baylam, I., Özharar, S., Kakenov, N., Kocabaş, C. and Sennaroğlu, A. 2016. “Chapter 12: Femtosecond pulse generation with voltage-controlled graphene saturable absorbers”, Optical Properties of Graphene, edited by Binder, R., World Scientific.
DOI: 10.1142/9789813148758_0012

2. Aydin, O., Aksoy, B., Akalin, O. B., Bayraktar, H. and Alaca B. E. 2016. “Time-resolved locan strain tracking microscopy for cell mechanics”, Review of Scientific Instruments, 87, 023905.
DOI: 10.1063/1.4941715

3. Bal, B., Sahin, I., Uzun, A. and Canadinc, D. 2016. “A new venue toward predicting the role of hydrogen embrittlement on metallic materials”, Metallurgical and Materials Transactions A, 47A, 5409.
DOI: 10.1007/s11661-016-3708-z

4. Onal, O., Gumus, B., Aksoy, B., Gerstein, G., Alaca, B. E., Maier, H. J. and Demircan Canadinc. 2016. “Micro-scale cyclic bending response of NiTi shape memory alloy”, Materials Transactions, 57(3), 472-475.
DOI: 10.2320/matertrans.M2015423

5. Wollschläger, N., Tasdemir, Z., Häusler, I., Leblebici, Y., Österle. W. and Alaca, B. E. 2016. “Determination of the elastic behavior of silicon nanowires within a scanning electron microscope”, Journal of Nanomaterials, 2016, 6 pages.
DOI: 10.1155/2016/4905838

6. Özkan, D., Yağci, M. B., Birer, Ö. and Kaleli, H. 2016. “Comparison of tribological performances of sülfür based and boron succuminide containing antiwear additive with ZDDP by engine bench tests”, Industrial Lubrication and Tribology, 68(4), 482-496.
DOI: 10.1108/ILT-11-2015-0173

7. Mirzajanzadeh, M. and Canadinc, D. 2016. “A microstructure-sensitive model for simulating the impact response of a high-manganese austenitic steel”, Journal of Engineering Materials and Technology, 138(4), 041004-1.
DOI: 10.1115/1.4033559

8. Tasdemir, Z., Wollschläger, N., Österle, W., Leblebici, Y. and Alaca, B. E. 2016. “A deep etching mechanism for trench-bridging silicon nanowires”, Nanotechnology, 27, 0953303 (8pp).
DOI: 10.1088/0957-4484/27/9/095303

9. Tomak, A., Bacaksiz, C., Mendirek, G., Sahin, H., Hur, D., Görgün, K., Senger, R. T., Birer, Ö., Peeters, F. M. and Zareie, H. M. 2016. “Structural changes in a Schiff base molecular assembly initiated by scanning tunneling microscopy tip”, Nanotechnology, 27, 335601 (10pp).
DOI: 10.1088/0957-4484/27/33/335601a>

10. Demir Duman, F., Khodadust, R., Durmusoglu, E. G., Yagci, M. B. and Yagci Acar, H. 2016. “Impact of reaction variables and PEI/L-cysteine ratio on the optical properties and cytocompatibility of cationic Ag2S quantum dots as NIR bio-imaging probes”, Royal Society of Chemistry Advances, 6, 77644.
DOI: 10.1039/c6ra13804g >

11. van den Ham, E. J., Elen, K., Kokal, I., Yağci, B., Peys, N., Bonneux, G., Ulu, F., Marchal, W., Van Bael, M. K. and Hardy, A. 2016. “From liquid to thin film: colloidal suspensions for tungsten oxide as an electrode material for Li-ion batteries”, Royal Society of Chemistry Advances, 6, 51747.
DOI: 10.1039/ c6ra08769h >

12. Yuan, Y., Karahan, E., Yıldırım, C., Wei, L., Birer, Ö., Zhai, S., Lau, R. and Chen, Y. 2016. “Smart poisoning” of Co/SiO2 catalysts by sulfidation for chirality-selective synthesis of 89,8) single-walled carbon nanotubes”, Nanoscale, 8, 17705.
DOI: 10.1039/c6nr05938d>

13. Karahan, H. E., Wei, L., Goh, K., Liu, Z., Birer, Ö., Dehghani, F., Xu, C., Wei, J. and Chen, Y. 2016. “Bacterial physiology is a key modulator of the antibacterial activity of graphene oxide”, Nanoscale, 8, 17181.
DOI: 10.1039/c6nr05745d >

14. Mahamdioua, N., Amira, A., Altintas, S. P., Varilci, A. and Terzioglu, C. 2016. “Structural and magnetotransport properties of the Y doped A-site deficient double layered manganites La1.2−x□0.2YxCa1.6Mn2O7”, Journal of Solid State Chemistry, 240, 1-8.
DOI: 10.1016/j.jssc.2016.05.011>

15. Önder, Ö. C., Yilgör, E. and Yilgör, İ. 2016. “Fabrication of rigid poly(lactic acid) foams via thermally induced phase separation”, Polymer, 107, 240-248.
DOI: 10.1016/ j.polymer.2016.11.025>

16. Kosak Söz, C., Yilgör, E. and Yilgör, İ. 2016. “Simple processes for the preparation of superhydrophobic polymer surfaces”, Polymer, 99, 580-593.
DOI: 10.1016/ j.polymer. 2016.07.051>

17. Boudjadja, Y., Amira, A., Saoudel, A., Mahamdioua, N., Varilci, A., Terzioglu, C. and Polat Altintas, S. 2016. “Effect of yttrium doping on structural and electrical properties of Bi2Sr1.9Ca0.1-xYxCu2O7+ (Bi-2202) cuprate ceramics”, Boletin de la Sociedad Espanola de Ceramica y Vidrio, 55, 202-208.
DOI: 10.1016/ j.bsecv.2016.07.003>

18. Esfahani, M. N., Sonne, M. R., Hattel, J. H. and Alaca, B. E. 2016. “Thermo-coupled Surface Cauchy-Born theory: An engineering finite element approach to modeling of nanowire thermomechanical response”, Mechanics of Materials, 94, 46-52.
DOI: 10.1016/ j.mechmat.2015.11.011>

19. Asik, D., Yagci, M. B., Demir Duman, F. and Yagci Acar, H. 2016. “One step emission tunable synthesis of PEG coated Ag2S NIR quantum dots and the development of receptor targeted drug delivery vehicles thereof”, Journal of Materials Chemistry B, 4, 1941-1950.
DOI: 10.1039/C5TB02599K

20. Chouhan, R. S., Qureshi, A., Yagci, B., Gülgün, M. A., Ozguz, V. and Niazi, J. H. 2016. “Biotransformation of multi-walled carbon nanotubes mediated by nanomaterial resistant soil bacteria”, Chemical Engineering Journal, 298, 1-9.
DOI: 10.1016/j.cej.2016.04.019

21. Karahan, E. H., Birer, Ö., Karakuş, K. and Yıldırım, C. 2016. “Shadow-Casted Ultrathin Surface Coatings of Titanium and Titanium/Silicon Oxide Sol Particles via Ultrasound-Assisted Deposition”, Ultrasonics Sonochemistry, 31, 481–489.
DOI: 10.1016/j.ultsonch.2016.01.032

22. Uzer, B., Toker, S. M., Cingoz, A., Bagci-Onder, T., Gerstein, G., Maier, H. J. and Canadinc, D. 2016. “An exploration of plastic deformation dependence of cell viability and adhesion in metallic implant materials”, Journal of the Mechanical Behavior of Biomedical Materials, 60, 177-186.
DOI: 10.1016/j.jmbbm.2016.01.001

23. Yildirim, E., Yurtsever, M., Wilkes, G. L. and Yilgör, I. 2016. “Effect of intersegmental interactions on the morphology of segmented polyurethanes with mixed soft segments: A coarse-grained simulation study”, Polymer, 90, 204-214.
DOI: 10.1016/j.polymer.2016.03.008

24. Yilgör, E., Isik, M., Söz, C. and Yilgör, I. 2016. “Synthesis and structure-property behavior of polycaprolactone-polydimethylsiloxane-polycaprolactone triblock copolymers”, Polymer, 83, 138-153.
DOI: 10.1016/j.polymer.2015.12.024

25. Yilmaz, C. and Unal, U. 2016. “Morphology and Crystal Structure Control of α-Fe2O3 Films by Hydrothermal Electrochemical Deposition in the Presence of Ce3+ and/or Acetate, F- Ions”, RSC Advances, 6, 8517-8527.
DOI: 10.1039/C5RA20105E

26. Yilmaz, C. and Unal, U. 2016. “Effect of Zn(NO3)2 concentration in hydrothermal–electrochemical deposition on morphology and photoelectrochemical properties of ZnO nanorods”, Applied Surface Science, 368, 456-463.
DOI: 10.1016/j.apsusc.2016.01.253

27. Zohour, B., Yilgor, I., Gulgun, M. A., Birer, O., Unal, U., Leidholm, C. and Senkan, S. 2016. “Cu-GaOx-HoOy Catalysts for the Reduction of Carbon Dioxide to Methanol at Atmospheric Pressure”, ChemCatChem,
DOI: 10.1002/cctc.201600020

28. Kinik., F. P., Altintas, C., Balci, V., Koyuturk, B., Uzun, A. and Keskin, A. S. 2017. ” [BMIM][PF6] Incorporation Doubles CO2 Selectivity of ZIF-8: Elucidation of Interactions and Their Consequences on Performance”, ACS Applied Materials & Interfaces, 8(45), 30992.
DOI: 10.1021/acsami.6b11087

29. Babucci, M., Balci, V., Akçay, A. and Uzun, A. 2016. “Interactions of [BMIM][BF4] with metal oxides and their consequences on stability limits”, Journal of Physical Chemistry C, 120, 20089.
DOI: 10.1021/acs.jpcc.6b03975

30. Kurtoglu, S.F., Soyer-Uzun, S. and Uzun, A. 2016. “Tuning structural characteristics of red mud by simple treatments”, Ceramics International, 42, 17581.
DOI: 10.1016/j.ceramint.2016.08.072

31. Bal, B., Sahin, I., Uzun, A. and Canadinc, D. 2016. “A new venue toward predicting the role of hydrogen embrittlement on metallic materials”, Metallurgical and Materials Transactions A, 47, 5409.
DOI: 10.1007/s11661-016-3708-z

32. Kurtoglu, S.F. and Uzun, A. 2016. “Red mud as an efficient, stable, and cost-free catalyst for COx-free hydrogen production from ammonia”, Scientific Reports, 6, 32279.br /> DOI: 10.1038/srep32279

33. Babucci, M. and Uzun, A. 2016. ” Effects of interionic interactions in 1,3-dialkylimidazolium ionic liquids on the electronic structure of metal sites in solid catalysts with ionic liquid layer (SCILL)”, Journal of Molecular Liquids, 216, 293.
DOI: 10.1016/j.molliq.2015.12.074

1. Yilmaz, C. and U. Unal, (2015). Photoelectrochemical properties of electrochemically deposited metal chalcogenide/ZnO films. Applied Surface Science, 350, p. 87-93.
DOI: 10.1016/j.apsusc.2015.03.134

2. Yilmaz, C. and U. Unal, (2015). Single step synthesis of (α-Fe2O3) hematite films by hydrothermal electrochemical deposition. RSC Advances, 5, p. 16082-16088.
DOI: 10.1039/C4RA16028B

3. Wei, L., D. Yu, E.H. Karahan, Ö. Birer, K. Goh, Y. Yuan, W. Jiang, W. Liang, and Y. Chen, (2015). E. coli-derived carbon with nitrogen and phosphorus dual functionalities for oxygen reduction reaction. Catalysis Today, 249, p. 228-235.
DOI: 10.1016/j.cattod.2014.08.031

4. Wei, L., H. Karahan, K. Goh, W. Jiang, D. Yu, Ö. Birer, R. Jiang, and Y. Chen, (2015). A high-performance metal-free hydrogen-evolution reaction electrocatalyst from bacterium derived carbon. Journal of Materials Chemistry A, 3, p. 7210-7214.
DOI: 10.1039/C5TA00966A

5. Söz, C., E. Yilgör, and I. Yilgör, (2015). Influence of the average surface roughness on the formation of superhydrophobic polymer surfaces through spin-coating with hydrophobic fumed silica. Polymer, 62, p. 118-128.
DOI: 10.1016/j.polymer.2015.02.032

6. Söz, C., E. Yilgör, and I. Yilgör, (2015). Influence of the coating method on the formation of superhydrophobic silicone–urea surfaces modified with fumed silica nanoparticles. Progress in Organic Coatings, 84, p. 143-152.
DOI: 10.1016/j.porgcoat.2015.03.015

7. Şişmanoğlu, T., S. Karakuş, Ö. Birer, G. Soylu, A. Kolan, E. Tan, Ö. Ürk, G. Akdut, and A. Kilislioglu, (2015). Preparation and characterization of antibacterial Senegalia (Acacia) senegal/iron–silica bio-nanocomposites. Applied Surface Science, 354, p. 250-255.
DOI: 10.1016/j.apsusc.2015.07.206

8. Sarac, E.F. and U. Unal, (2015). Electrochemical-hydrothermal synthesis of manganese oxide films as electrodes for electrochemical capacitors. Electrochimica Acta, 178, p. 199-208.
DOI: 10.1016/j.electacta.2015.07.169

9. Öngel, C., M. Keleş, E. Acar, and Ö. Birer, (2015). Atmospheric Pressure Plasma Jet Treatment of Human Hair Fibers. Journal of Bio- and Tribo-Corrosion, 1, p. 1-10.
DOI: 10.1007/s40735-015-0007-y

10. Karahan, E.H., K. Karakuş, and Ö. Birer, (2015). Simultaneous DLS–SLS study of titanium and titanium/silicon oxide sol growth. Journal of Sol-Gel Science and Technology, 76, p. 251-259.
DOI: 10.1007/s10971-015-3772-7

11. Ertaş, S.F., E.F. Saraç, U. Ünal, and Ö. Birer, (2015). Ultrasound-assisted hexamethylenetetramine decomposition for the synthesis of alpha nickel hydroxide intercalated with different anions. Journal of Solid State Electrochemistry, 19, p. 3067-3077.
DOI: 10.1007/s10008-015-2929-1

12. Eris, G., A. Bozkurt, A. Sunol, A. Jonáš, A. Kiraz, E.B. Alaca, and C. Erkey, (2015). Determination of viscosity and density of fluids using frequency response of microcantilevers. The Journal of Supercritical Fluids, 105, p. 179-185.
DOI: 10.1016/j.supflu.2015.04.012

13. Duman, F., I. Hocaoglu, D. Ozturk, D. Gozuacik, A. Kiraz, and H. Acar, (2015). Highly luminescent and cytocompatible cationic Ag 2 S NIR-emitting quantum dots for optical imaging and gene transfection. Nanoscale, 7, p. 11352-11362.
DOI: 10.1039/C5NR00189G

14. Birer, Ö., (2015). Reactivity zones around an atmospheric pressure plasma jet. Applied Surface Science, 354, p. 420-428.
DOI: 10.1016/j.apsusc.2015.04.100

15. Yilgör, I., E. Yilgör, and G.L. Wilkes, (2015). Critical parameters in designing segmented polyurethanes and their effect on morphology and properties: A comprehensive review. Polymer, 58, p. A1-A36.
DOI: 10.1016/j.polymer.2014.12.014

1. Yilmaz, C. and U. Unal, (2014). Effect of Cerium Doping on Morphology and Physical Properties of α-Fe2O3 Films Prepared by Hydrothermal Electrodeposition. ECS Transactions, 58, p. 55-63.
DOI: 10.1149/05819.0055ecst

2. Yilmaz, C. and U. Unal, (2014). Synthesis and Characterization of Hierarchical ZnO Structures by a Single-Step Electrodeposition under Hydrothermal Conditions. Electrochimica Acta, 123, p. 405-411.
DOI: 10.1016/j.electacta.2014.01.039

3. Yilgör, E. and I. Yilgör, (2014). Silicone containing copolymers: Synthesis, properties and applications. Progress in Polymer Science, 39, p. 1165-1195.
DOI: 10.1016/j.progpolymsci.2013.11.003

4. Yıldırım, C. and Ö. Birer, (2014). Ultraviolet upconversion spectra of sonochemically synthesized doped NaYF4 crystals. Chemical Physics, 445, p. 46-52.
DOI: 10.1016/j.chemphys.2014.10.002

5. Toker, S.M., D. Canadinc, H.J. Maier, and O. Birer, (2014). Evaluation of passive oxide layer formation–biocompatibility relationship in NiTi shape memory alloys: Geometry and body location dependency. Materials Science and Engineering: C, 36, p. 118-129.
DOI: 10.1016/j.msec.2013.11.040

6. Soylu, A., M. Polat, D. Erdogan, Z. Say, C. Yıldırım, Ö. Birer, and E. Ozensoy, (2014). TiO2–Al2O3 binary mixed oxide surfaces for photocatalytic NOx abatement. Applied Surface Science, 318, p. 142-149.
DOI: 10.1016/j.apsusc.2014.02.065

7. Sami, S., E. Yildirim, M. Yurtsever, E. Yurtsever, E. Yilgor, I. Yilgor, and G.L. Wilkes, (2014). Understanding the influence of hydrogen bonding and diisocyanate symmetry on the morphology and properties of segmented polyurethanes and polyureas: Computational and experimental study. Polymer, 55, p. 4563-4576.
DOI: 10.1016/j.polymer.2014.07.028

8. Hocaoglu, I., F. Demir, O. Birer, A. Kiraz, C. Sevrin, C. Grandfils, and H. Acar, (2014). Emission tunable, cyto/hemocompatible, near-IR-emitting Ag2S quantum dots by aqueous decomposition of DMSA. Nanoscale, 6, p. 11921-11931.
DOI: 10.1039/C4NR02935F

9. Baylam, I., M.N. Cizmeciyan, S. Ozharar, E.O. Polat, C. Kocabas, and A. Sennaroglu, (2014). Femtosecond pulse generation with voltage-controlled graphene saturable absorber. Optics Letters, 39, p. 5180.
DOI: 10.1364/OL.39.005180

10. Angı, A., D. Sanlı, C. Erkey, and Ö. Birer, (2013). Catalytic activity of copper (II) oxide prepared via ultrasound assisted Fenton-like reaction. Ultrasonics sonochemistry, 21, p. 854-859.
DOI: 10.1016/j.ultsonch.2013.09.006

1. Yilmaz, C. and U. Unal, (2013). Electrochemical deposition of Mn: ZnO films under hydrothermal conditions. Journal of the Electrochemical Society, 160, p. D163-D167.

DOI: 10.1149/2.077304jes

2. Ozharar, S., I. Baylam, N.M. Cizmeciyan, O. Balci, E. Pince, C. Kocabas, and A. Sennaroglu, (2013). Graphene mode-locked multipass-cavity femtosecond Cr^4+: forsterite laser. Journal of the Optical Society of America B, 30, p. 1270.
DOI: 10.1364/JOSAB.30.001270

3. Malay, O., I. Yilgor, and Y.Z. Menceloglu, (2013). Effects of solvent on TEOS hydrolysis kinetics and silica particle size under basic conditions. Journal of Sol-Gel Science and Technology, 67, p. 351-361.
DOI: 10.1007/s10971-013-3088-4

4. Malay, O., O. Oguz, C. Kosak, E. Yilgor, I. Yilgor, and Y.Z. Menceloglu, (2013). Polyurethaneurea–silica nanocomposites: Preparation and investigation of the structure–property behavior. Polymer, 54, p. 5310-5320.
DOI: 10.1016/j.polymer.2013.07.043

5. Ertaş, S.F., R. Kaş, U. Ünal, and Ö. Birer, (2013). Sonochemical synthesis and electrochemical characterization of α-nickel hydroxide: precursor effects. Journal of Solid State Electrochemistry, 17, p. 1455-1462.
DOI: 10.1007/s10008-013-2017-3

6. Ertaş, F., R. Kaş, A. Mikó, and Ö. Birer, (2013). Anticorrosion efficiency of ultrasonically deposited silica coatings on titanium. Applied Surface Science, 276, p. 810-816.
DOI: 10.1016/j.apsusc.2013.03.176

7. Cizmeciyan, M.N., J.W. Kim, S. Bae, B.H. Hong, F. Rotermund, and A. Sennaroglu, (2013). Graphene mode-locked femtosecond Cr:ZnSe laser at 2500 nm. Optics letters, 38, p. 341-343.

DOI: 10.1364/OL.38.000341

8. Bozbag, S.E., U. Unal, M.A. Kurykin, C.J. Ayala, M. Aindow, and C. Erkey, (2013). Thermodynamic Control of Metal Loading and Composition of Carbon Aerogel Supported Pt–Cu Alloy Nanoparticles by Supercritical Deposition. The Journal of Physical Chemistry C, 117, p. 6777-6787.
DOI: 10.1021/jp311641g

9. Bilgin, S., M. Isik, E. Yilgor, and I. Yilgor, (2013). Hydrophilization of silicone–urea copolymer surfaces by UV/ozone: Influence of PDMS molecular weight on surface oxidation and hydrophobic recovery. Polymer, 54, p. 6665-6675.
DOI: 10.1016/j.polymer.2013.10.019

1. Yilmaz, C., U. Unal, and H. Acar, (2012). Platelets to rings: Influence of sodium dodecyl sulfate on Zn–Al layered double hydroxide morphology. Journal of Solid State Chemistry, 187, p. 295-299.
DOI: 10.1016/j.jssc.2012.01.039

2. Yilgor, I., S. Bilgin, M. Isik, and E. Yilgor, (2012). Facile preparation of superhydrophobic polymer surfaces. Polymer, 53, p. 1180-1188.
DOI: 10.1016/j.polymer.2012.01.053

3. Yilgor, I., S. Bilgin, M. Isik, and E. Yilgor, (2012). Tunable Wetting of Polymer Surfaces. Langmuir, 28, p. 14808-14814.
DOI: 10.1021/la303180k

4. Yilgor, E., O. Kaymakci, M. Isik, S. Bilgin, and I. Yilgor, (2012). Effect of UV/ozone irradiation on the surface properties of electrospun webs and films prepared from polydimethylsiloxane–urea copolymers. Applied Surface Science, 258, p. 4246-4253.
DOI: 10.1016/j.apsusc.2011.12.063

5. Sevinç, E., S.F. Ertas, G. Ulusoy, C. Ozen, and H. Acar, (2012). Meso-2,3-dimercaptosuccinic acid : from heavy metal chelation to CdS quantum dots. Journal of Materials Chemistry, 22, p. 5137-5144.
DOI: 10.1039/C2JM15741A

6. Sarac, F., C. Yilmaz, F. Acar, and U. Unal, (2012). CdTe quantum dot sensitized hexaniobate nanoscrolls and their photoelectrochemical properties. RSC Advances, 2, p. 10182-10184.
DOI: 10.1039/C2RA21252H

7. Kaş, R., F. Ertaş, and Ö. Birer, (2012). Ultrasound assisted deposition of silica coatings on titanium. Applied Surface Science, 259, p. 501-507.
DOI: 10.1016/j.apsusc.2012.07.074

8. Kaş, R. and Ö. Birer, (2012). Sonochemical shape control of copper hydroxysulfates. Ultrasonics Sonochemistry, 19, p. 692-700.
DOI: 10.1016/j.ultsonch.2011.08.007

1. Yilgor, E., T. Eynur, C. Kosak, S. Bilgin, I. Yilgor, O. Malay, Y. Menceloglu, and G.L. Wilkes, (2011). Fumed silica filled poly(dimethylsiloxane-urea) segmented copolymers: Preparation and properties. Polymer, 52, p. 4189-4198.
DOI: 10.1016/j.polymer.2011.07.041